DMV Magic Touch Contact Lens Remover

Unlike many rigid contact lens tools designed primarily for removal, the DMV Magic Touch supports both insertion and removal in one compact device. Its controllable vented design is particularly useful for wearers who find finger-based handling difficult.

• Hard and rigid gas-permeable contact lens wearers
• People who find manual lens insertion or removal difficult
• Wearers seeking one tool for both application and removal
• Those with reduced dexterity or confidence handling small rigid lenses

• Supports both insertion and removal of hard and RGP lenses
• Squeezable handle allows suction to be controlled
• Releases if accidentally attached to the eye
• Helps provide stable, centred lens positioning
• Compact and easy to handle
• Reusable by a single patient
• Supplied with a protective storage case

The DMV Magic Touch Contact Lens Insertion and Removal Tool provides controlled handling of hard and rigid gas-permeable contact lenses. Designed for both application and removal, it offers a convenient alternative to using separate tools or relying entirely on finger-based techniques.

For removal, squeezing the vented handle creates suction against the centred lens, allowing it to be lifted directly from the eye. Releasing the handle removes the suction so the lens can slide away from the cup. For insertion, the wet lens rests on the suction cup without the handle being squeezed, supporting controlled placement onto the eye.

The Magic Touch is particularly suitable for RGP and hard contact lens wearers who experience difficulty with dexterity, positioning or manual removal. Its compact design also makes it practical for everyday contact lens care and travel.

This reusable medical device should form part of a complete lens-care routine alongside the contact lens solution recommended by your eye care professional. It is not designed for soft, hybrid or scleral contact lenses and should only be used following instruction from your optometrist or contact lens fitter.

The vented handle regulates suction according to whether it is squeezed or released. Squeezing creates suction for lens removal, while leaving the handle unsqueezed allows a wet hard or RGP lens to rest on the cup for insertion.

1. Before first use, clean the tool with 70% isopropyl alcohol and allow it to air dry completely.
2. Wash and dry your hands thoroughly before handling your lenses.

For removal:

1. Moisten the suction cup.
2. Firmly squeeze the middle of the handle.
3. Ensure the contact lens is centred on the eye.
4. Using a mirror, align the suction cup with the centre of the lens.
5. Touch the cup to the lens while maintaining pressure on the handle.
6. Draw the lens directly away from the eye.
7. Release the handle, then gently slide the lens from the suction cup.

For insertion:

1. Place the wet contact lens onto the suction cup.
2. Do not squeeze the handle.
3. Position the lens directly onto the eye as instructed by your eye care professional.
4. After each use, clean with 70% isopropyl alcohol, allow to air dry and store in the supplied case.
5. Keep the air channel free from debris and replace the device approximately every six months.

Composition: Dry natural rubber
Does not contain liquid latex
Contains no active ingredients or liquid formulation
Single-patient, multiple-use medical device

Choose this product if you wear hard or RGP lenses and want one vented tool specifically designed to support both insertion and removal.

You may prefer the DMV Classic Vented Contact Lens Remover if you only require assistance with removing an RGP lens and prefer a straightforward vented remover.

You may prefer the DMV Ultra or DMV 45 Contact Lens Remover if you prioritise firm, non-vented suction for removal. The DMV 45 may also suit wearers who find an angled handle easier to position.

Compared with the Menicon Contact Lens Remover, this option is better suited for wearers who want a squeezable vented handle with clearly controlled suction and release.

You may prefer the ScleralEase All-in-One Scleral Lens Application & Removal Tool if you wear scleral lenses and require a dual-ended tool designed for their larger diameter. The Magic Touch is intended for hard and RGP lenses rather than scleral lenses.

Q: Can the DMV Magic Touch be used for both insertion and removal?
A: Yes. It is specifically designed to assist with both the insertion and removal of hard and rigid gas-permeable contact lenses.

Q: Is it suitable for soft or hybrid contact lenses?
A: No. The manufacturer advises that the Magic Touch must not be used with soft or hybrid contact lenses.

Q: Can I use it for scleral lenses?
A: No. A purpose-designed scleral insertion and removal system, such as ScleralEase, is more appropriate.

Q: What happens if the tool accidentally attaches to my eye?
A: Release the handle immediately. The vented design releases the suction so the device does not remain attached to the eye.

Q: How should I clean and replace the tool?
A: Clean it with 70% isopropyl alcohol before first use and after every subsequent use. Allow it to air dry, store it in its case and plan to replace it approximately every six months, as directed in the DMV product instructions.